Flatbed and Equipment Hauler Supplies
Flatbed and Equipment Hauler Supplies
Equipment of 10,000 lb or more needs at least four tiedowns under 49 CFR §393.130. GO-TOW.COM supplies Grade 70 chain, binders, ratchets and edge protection for skid steers, mini excavators and flatbed freight.
Landscapers, contractors and equipment dealers move skid steers, mini excavators and compact loaders on flatbeds and gooseneck trailers every day. Weight decides the rules: machines of 10,000 lb or more need at least four tiedowns (49 CFR §393.130).
Gear for equipment and flatbed loads
Hauling vehicles too? See Auto Hauler Supplies. Hotshot driver? Start at Hotshot delivery supplies. Standard items ship free at $175+ and heavy freight (20 lb or more per unit) ships free at $500+ within the contiguous U.S. Ask us about FedEx 2-Day on standard-weight items when a load is waiting on the gear.
Frequently asked questions
How many tiedowns does a skid steer or mini excavator need?
If the machine weighs 10,000 lb or more, 49 CFR §393.130 requires at least four tiedowns, placed as close as practicable to the front and rear, and requires articulated parts to be restrained and accessory equipment such as buckets lowered and secured. Lighter machines fall under the general cargo rules in 49 CFR §393.110 and 49 CFR §393.106. Weigh your actual machine, including attachments.
Chain or straps for equipment?
Chain is the usual choice for steel tracks, sharp frames and heavy machines. Straps work where surfaces are smooth and the strap is protected at edges. Either way, the combined WLL must reach at least half the cargo weight.
What size chain do you carry?
Our Grade 70 transport chain comes in 5/16" and 3/8" options with clevis grab hooks, plus 5/16" RTJ-hook 4-packs rated 4,700 lb WLL each. Match binders and hooks to the chain size and grade.
Not sure what fits your rig? Call us.
Tell us what you haul and the weight. We will point you to the right straps, chain and hardware before you order.
Call 833.LIFT.TOW (833.543.8869)Phone support 7 days a week. Walk-ins welcome 5 days a week at 1015 N I-35E, Suite 218, Carrollton, TX 75006 (weekends by appointment).
Disclaimer: This page is general information for haulers, not legal, safety or engineering advice. Regulation references were checked against the eCFR on October 2, 2026, and rules change. Requirements depend on your vehicle, cargo, weight and state, so confirm them with FMCSA and your state agency. Always use the working load limit (WLL) marked on each strap, chain and binder, never exceed it, and inspect gear before every trip. Product suitability for your load is your responsibility. If you are unsure, call us before you buy.