3/8" G70 Chain Extension with Pear Link & Eye Grab Hook

3/8" Grade 70 Chain Extension with Pear Link & Eye Grab Hook — 5,400 lbs WLL

The 3/8" Grade 70 chain extension with pear link and eye grab hook solves the gap problem on chain tie-down assemblies — when the working chain is too short to reach the load anchor point cleanly, or when you need to add reach to an existing assembly without replacing the whole chain. At 5,400 lbs WLL with a 3:1 design factor, this extension maintains a robust safety margin while integrating seamlessly into G70 chain setups.

The pear link provides the connection point between the extension and the main chain assembly. The eye grab hook at the other end gives you a fixed capture point that engages vehicle anchor hardware or trailer D-rings cleanly. A complete, ready-to-use extension — no assembly required.

What's Included

• One (1) — 3/8" Grade 70 Chain Extension with Pear Link and Eye Grab Hook (SKU: CXP)

Specifications

Why a Chain Extension Instead of a Longer Chain

Chain extensions add reach to an existing assembly without discarding a functional chain. The pear link connects the extension to the main chain, the hook engages the load anchor, and the working length increases by the extension's length — all while staying within the Grade 70 system. Extensions are the right tool when loads vary in position, when anchor points aren't always in the same place, or when an operator keeps a standard chain length on every trailer but occasionally needs a few extra inches to reach.

Note: The complete assembly's WLL is limited to the lowest-rated component in the chain. At 5,400 lbs WLL, this extension is rated below the standard 3/8" G70 hook's 6,600 lbs WLL — size the total assembly accordingly.

Frequently Asked Questions

Grade 70 chain assemblies, extensions, hooks, and complete transport chain kits at GO-TOW.COM.