Return label provided once approved
Heavy freight free at $500+
833.LIFT.TOW / 833.543.8869
Walk-ins 5 days a week; weekends by appointment
PDC
Rubber Webbing Protector for 3" or 4" Straps — Single, 10, 20, 40 or 60 Pack
Rubber Webbing Protector for 3" or 4" Straps — Single, 10, 20, 40 or 60 Pack
SKU:LC15-4R
Low stock: 7 left
Couldn't load pickup availability
Rubber Webbing Protector for 3" or 4" Straps
A rubber webbing protector is a sleeve that slides onto a strap and sits where the webbing touches a sharp edge, a rough surface, or a heavy load. It is designed to help protect webbing from abrasion, cuts, and wear at that contact point, which helps extend the life of the strap.
The sleeve is designed for 3-inch and 4-inch webbing. Choose a single protector or a 10, 20, 40 or 60 pack from the quantity options above. Larger packs cost less per protector.
Quantity Options| Qty | SKU | Shipping weight |
|---|---|---|
| 1 | LC15-4R | 0.83 lb |
| 10 | LC15-4RX10 | 3 lb |
| 20 | LC15-4RX20 | 6 lb |
| 40 | LC15-4RX40 | 12 lb |
| 60 | LC15-4RX60 | 18 lb |
| Pack quantities | 1, 10, 20, 40 or 60 |
| Webbing width | 3" or 4" |
| Material | Rubber |
Commonly used where webbing crosses an edge or rough surface. Suitability depends on the load, the securement method, and applicable requirements.
Which strap widths does it fit?
It is designed for 3-inch and 4-inch webbing. Check that your strap width matches before ordering.
Where on the strap does the protector go?
Slide it to the point where the webbing contacts an edge or rough surface, then tighten the strap normally and check that the sleeve has not shifted.
Which pack size should I order?
Order a single to replace one worn protector. Packs of 10, 20, 40 and 60 cost less per protector and suit shops that outfit several straps or restock a truck or deck.
Does it replace a worn strap?
No. If webbing is cut, frayed, or damaged, remove it from service according to the strap manufacturer's guidance. A protector helps reduce wear but cannot repair damage.
