1 7

30-Day Returns
Return label provided once approved

Free Shipping $175+
Heavy freight free at $500+

Phone Support 7 Days
833.LIFT.TOW / 833.543.8869

Local Carrollton, TX Office
Walk-ins 5 days a week; weekends by appointment

Weisner

Stainless Steel Double "J" Hooks | SIZE OPTIONS

$8.95

Sale Sold out

Shipping calculated at checkout.

Size 1 Inch 2 Inch

SKU:1WSS

100 in stock

Quantity

Stainless Steel Double J Hooks — Single Hook in 1" or 2" Width for Auto Transport Tie-Downs

The stainless steel double J hook is a corrosion-resistant, dual-end hook built for auto transport tie-down straps on vehicle carriers and car haulers. Where standard steel hooks rust after exposure to weather, road salt, and moisture, stainless steel construction keeps these hooks functional and presentable for the long haul. Available in 1" (for 1" webbing) and 2" (for 2" webbing) to match your strap width.

Both sizes are sold individually here — ideal for replacing a single worn or damaged hook in an existing strap assembly without buying a full multi-pack.

What's Included

One (1) — Stainless Steel Double J Hook (select 1" [SKU: 1WSS] or 2" [SKU: 2WSS] at checkout)

Specifications

Available Sizes	1 Inch (SKU: 1WSS) \| 2 Inch (SKU: 2WSS)
Material	Stainless Steel
Hook Type	Double J Hook (dual-end)
WLL — 1" Size	1,100 lbs
Break Strength — 1" Size	3,300 lbs
WLL — 2" Size	1,466 lbs
Break Strength — 2" Size	4,400 lbs
Compatible Webbing	1" webbing (1" hook) \| 2" webbing (2" hook)
Typical Application	Auto transport, vehicle tie-down straps
Quantity	1

Why Stainless Steel on a Car Hauler?

Vehicle transport exposes equipment to sustained wet weather, road spray, and winter salt. Standard steel J hooks oxidize, and surface rust eventually locks up the hook's threading or stiffens the strap connection. Stainless steel resists corrosion throughout the hook's service life — both at the surface and at the sew-on tab where it mates with the webbing. On a hauler running daily in all conditions, stainless hooks significantly outlast painted or zinc-plated steel alternatives.

The double J (dual-end) format gives you two engagement points — the flat tab for strap loop attachment, and the J-bend hook profile — providing secure, low-profile connection points that work under auto transport tie-down strap systems.

Frequently Asked Questions

What are the WLL ratings for each size?

The 1" hook (SKU: 1WSS) is rated 1,100 lbs WLL with a 3,300 lbs break strength. The 2" hook (SKU: 2WSS) is rated 1,466 lbs WLL with a 4,400 lbs break strength. These ratings apply when the hook is properly sewn or assembled into a compatible webbing strap — standalone hook ratings assume correct installation.

What is a "double J hook"?

A double J hook has J-shaped ends on both sides of a central flat bar — often also called a double-end J hook or automotive hook. The flat bar runs through a sewn webbing loop to anchor the hook to the strap, while the J ends provide the actual engagement profile against the vehicle's tie-down rail or wheel strapping plate. The dual-end design lets the hook connect to anchor points on both sides of the strap centerline.

How do I choose between 1" and 2"?

Match the hook width to your strap width. 1" hooks are for 1" webbing strap assemblies; 2" hooks are for 2" webbing. Using the wrong size results in improper fit at the sewn loop, poor load distribution, and potential strap or hook failure. If you're replacing a hook on an existing strap, measure the strap width or check the strap's label.

Are these hooks available in multi-packs?

Yes — GO-TOW.COM carries 4-packs of the 2" stainless double J hook (SKU: 2WSSX4) and the 1" stainless double J hook (SKU: 1WSSX4) for higher-quantity needs.

Stainless Steel Double J Hooks in single and 4-pack at GO-TOW.COM.