Return label provided once approved
Heavy freight free at $500+
833.LIFT.TOW / 833.543.8869
Walk-ins 5 days a week; weekends by appointment
VeeBoards®
Tarp Guard 8" Corner Protector for Tarped Loads — Single, 10, 20, 40 or 60 Pack
Tarp Guard 8" Corner Protector for Tarped Loads — Single, 10, 20, 40 or 60 Pack
SKU:TG
138 in stock
Couldn't load pickup availability
8" Tarp Guard Corner Protector
Sharp load corners are a common place for a tarp to tear when the load shifts or the strap is tightened. The Tarp Guard is an 8-inch HDPE corner protector designed to sit between the tarp and the corner so the tarp is not pulled directly across the edge. It is made in the USA.
Choose a single Tarp Guard or a 10, 20, 40, or 60 pack from the quantity options above. Larger packs cost less per Tarp Guard.
Quantity Options| Qty | SKU | Shipping weight |
|---|---|---|
| 1 | TG | 0.5 lb |
| 10 | TGX10 | 5 lb |
| 20 | TGX20 | 10 lb |
| 40 | TGX40 | 20 lb |
| 60 | TGX60 | 30 lb |
| Pack quantities | 1, 10, 20, 40 or 60 |
| Length | 8 inches |
| Material | HDPE plastic |
| Weather resistance | UV and weather resistant |
| Origin | Made in USA |
Commonly used at tarped load corners. Suitability depends on the load, the securement method, and applicable requirements.
Where does the Tarp Guard go?
Place it on the load corner under the tarp, or between the strap and the tarp where the strap would otherwise pull across an edge, then tighten the strap normally.
Does it protect the load or the tarp?
It is designed mainly to protect the tarp from tears and abrasion at sharp corners. It also keeps strap contact off the corner itself.
Which pack size should I order?
Order a single to add or replace one Tarp Guard. Packs of 10, 20, 40 and 60 cost less per Tarp Guard and suit flatbed operators who tarp several loads or restock a fleet.
